Cold Start Injector 2

Where it lives

For P0214, start at the injector the description names.

Check these first

• A faulty cold start injector 2
• An open or short in the cold start injector 2 wiring
• A bad cold start injector 2 relay
• A corroded cold start injector 2 connector
• Low battery voltage during cold start

What to do next

1. Read the cold start injector 2 circuit on a scan tool
2. Inspect the injector 2 connector and wiring
3. Check the cold start injector 2 relay
4. Measure the injector 2 resistance against spec
5. Charge or replace the battery if voltage is low
6. Clear the code and retest

Look up another code