Gear Lever Y Position Sensor 1 Circuit Low

Where it lives

For P082E, the sensor sits on the circuit this code reports. The description of P082E reports a fault at the sensor.

Check these first

• A short to ground in the sensor 1 signal wire
• A gear lever Y position sensor 1 with low output
• Water in the sensor 1 connector
• A poor sensor 1 ground

What to do next

1. Read gear lever Y position sensor 1 voltage
2. Test the signal wire for a short to ground
3. Check the sensor 1 ground circuit
4. Dry and reseat the sensor connector
5. Replace the sensor if the voltage stays low
6. Clear the code and retest

Look up another code