Gear Lever Y Position Sensor 1 Circuit High

Where it lives

For P082F, the circuit described runs through the sensor. The description of P082F reports a fault at the sensor.

Check these first

• An open in the sensor 1 ground wire
• A signal wire shorted to voltage
• A gear lever Y position sensor 1 with high output
• A loose sensor 1 connector pin

What to do next

1. Read gear lever Y position sensor 1 voltage
2. Test the signal wire for a short to voltage
3. Test the ground wire for an open
4. Wiggle test the sensor connector
5. Replace the sensor if the signal stays high
6. Clear the code and retest

Look up another code