Intake Manifold Runner Position Sensor/Switch Circuit Bank 1

Where it lives

For P2014, the sensor sits on the circuit this code reports. The description of P2014 puts it on bank 1.

Check these first

• An open or short in the bank 1 runner position sensor circuit
• A failed bank 1 runner position sensor
• A backed out pin at the bank 1 position sensor connector
• Chafed wiring along the bank 1 sensor harness

What to do next

1. Read bank 1 runner position sensor on a scan tool
2. Test the sensor circuit for open and short faults
3. Check the sensor connector pins
4. Verify reference voltage at the bank 1 position sensor
5. Replace the bank 1 position sensor if faulty
6. Clear the code and retest

Look up another code