Intake Manifold Runner Position Sensor/Switch Circuit Low Bank 1

Where it lives

For P2016, the sensor sits on the circuit this code reports. The description of P2016 puts it on bank 1.

Check these first

• A short to ground on the bank 1 runner position sensor signal wire
• An open in the sensor circuit
• A failed bank 1 runner position sensor
• A loose connector at the bank 1 position sensor

What to do next

1. Read bank 1 runner position sensor on a scan tool
2. Test the sensor signal wire for a short to ground
3. Check the sensor connector and pins
4. Verify reference voltage at the bank 1 position sensor
5. Replace the bank 1 position sensor if faulty
6. Clear the code and retest

Look up another code