Pressure Control Solenoid K Intermittent

Where it lives

For P282C, the part to look at first is the solenoid named here.

Check these first

• A pressure control solenoid K wiring fault that comes and goes
• A corroded or loose pressure control solenoid K connector
• A failing pressure control solenoid K
• Heat or vibration shifting the pressure control solenoid K circuit

What to do next

1. Read pressure control solenoid K status on a scan tool while wiggling the harness
2. Test the pressure control solenoid K wiring for intermittent open and short faults
3. Check the pressure control solenoid K connector pins for corrosion
4. Check transmission fluid level and condition
5. Replace pressure control solenoid K if the fault returns
6. Clear the code and retest

Look up another code