Pressure Control Solenoid K Control Circuit/Open

Where it lives

For P282D, the circuit described runs through the solenoid. The description of P282D reports the solenoid as open.

Check these first

• An open in the pressure control solenoid K control circuit
• A short to ground or voltage on the pressure control solenoid K control wire
• A failed pressure control solenoid K
• A corroded or backed out pin at the pressure control solenoid K connector

What to do next

1. Read pressure control solenoid K status on a scan tool
2. Command pressure control solenoid K on and off
3. Test the pressure control solenoid K control circuit for open and short faults
4. Check the pressure control solenoid K connector pins
5. Replace pressure control solenoid K if the circuit tests good
6. Clear the code and retest

Look up another code