OBD B Camshaft Profile Actuator Position Sensor C Range/Performance Bank 1
What it means
P2C1B stands for B Camshaft Profile Actuator Position Sensor C Range/Performance Bank 1. P2C1B is a P code, so the fault sits in the engine, transmission and emissions systems. For P2C1B, work through the cause list below, cheapest checks first.
Where it lives
For P2C1B, the part to look at first is the sensor named here. The description of P2C1B puts it on bank 1.
What to check first
For P2C1B, check the bank 1 reading against the other bank before buying parts, since if only one side is out of range that side is the fault.
Check these first
- P2C1B: Faulty or contaminated sensor in the fuel/air metering circuit
- P2C1B: Damaged or shorted wiring or connector for the affected circuit
- P2C1B: Vacuum leak or intake system restriction
- P2C1B: Failing fuel pump, injector, or fuel pressure regulator
What to do next
P2C1B is a fault in the powertrain control system. The steps below are general, so what actually failed on your vehicle may not be what P2C1B names.
- P2C1B: Read freeze frame data and related codes with an OBD-II scanner
- P2C1B: Inspect the affected sensor wiring and connector for damage
- P2C1B: Compare live sensor readings (fuel trim, airflow, temperatures) to manufacturer specs
- P2C1B: Smoke test the intake system if lean or vacuum conditions are suspected
- P2C1B: Replace the failed component after confirming it with live data
Look up another code
Enter a full code or a symptom. Press / to search. How to read a code
Type a code above, or start from a symptom or a common code.
Updated
Generic SAE J2012 definition. Last updated 2026-08-30.