B Camshaft Profile Actuator Position Sensor C Circuit Low Bank 1

Where it lives

For P2C1C, the sensor sits on the circuit this code reports. The description of P2C1C puts it on bank 1.

Check these first

• A short to ground on the camshaft profile actuator position sensor C signal
• A position sensor C with failed internal resistance
• Oil contamination at the position sensor C connector
• A chafed sensor C harness on the B actuator

What to do next

1. Read camshaft profile actuator position sensor C on a scan tool
2. Disconnect sensor C and watch the low reading clear
3. Test the sensor C signal wire for a short to ground
4. Inspect the sensor C harness for chafing
5. Replace position sensor C if the circuit tests good
6. Clear the code and retest

Look up another code